Self-cleaning permanent magnetic separators, or permanent cross belts as they are commonly called, are used in almost every industry where there is a need to clean pig iron from a conveyor, but the intensity does not have to be as high and the job is easier. Some industries like this include plastic recycling, tire shredding, fertilizer, scrap metal and many more.

Permanent magnetic power plant separators, or cross belts as they are commonly called, are used in most power plants to remove any unwanted iron that gets into the system and onto the belts. An armored belt is available if the parts are sharp.

Manual cleaning permanent magnet separators are widely used to remove residual iron from conveyed materials. Permanent manual magnetic separators are used to remove small amounts of residual iron in the material. The unloadable iron can be easily removed using the hand handle. With some care, it may not require maintenance.

Permanent magnet drum separators are typically used to remove larger pieces of iron at a coarser stage. They are very useful in saving equipment costs by removing hard-to-reach materials early in the process cycle.

Belt electromagnetic separators are installed along the material flow or transversely to remove ferrous materials over the side of the conveyor or across the conveyor.

LONGi Electromagnetic Belt Conveyor Iron Separators, or Electro-Cross Belt Separators as they are commonly known, feature a highly advanced coil design that has been designed for use in a wide variety of operating environments.

The manual electromagnetic iron separator is used at sites where it is necessary to remove small and large iron particles in thick layers of material, such as coal transportation stations, concrete processing sites, etc.

Lifting magnet is usually used to transport scrap continuously throughout the day. It is used in metalworking plants to lift and transport steel parts, forgings, castings, plates, beams, channels, angles, bars and bar grating. These are effective devices for saving time and labor costs. This relieves operators of the cumbersome work of installing and securing lift supports using traditional material handling tools.

Broadband magnet is widely used in areas with transported materials. Belt magnets are installed on top of the cross conveyors. The permanent magnet unit is a key piece of equipment which, thanks to our advanced designs, is usually equipped with a discharge belt. It has high strength as well as a long service life.

Permanent magnet drum separators are typically used to remove larger pieces of iron at a coarser stage. They are very useful in saving equipment costs by removing hard-to-reach materials early in the process cycle.