Products
![[Exhibition Highlights] LONGi Magnet at CIM Convention 2026 in Vancouver](https://ecdn.cnyandex.com/sylj/uploads/LONGi-Magnet-на-выставке-CIM-Convention-2026.jpg)
![[Exhibition Highlights] Longi Shines at the 19th Non-Metallic Minerals Conference](https://ecdn.cnyandex.com/sylj/uploads/Компания-Longi-блистает-на-19-й.jpg)
Dust collector for monocrystalline silicon
Structure: Includes dust bin top cover, dust collection chamber, filter bag assembly (inside the cylinder), etc.
Description
marker
| Applicable industries | Industrial complex, energy and mining industry |
| Model | LJC-160 |
| Weight | 450KG |
| Dimensions | 1510mmX1150mmX2300mm |
| Production productivity | ≥360 L/s |
| Frequency | 1time/(15-20)S |
| Working pressure | ≤1.0MPa |
| Dust removal efficiency | ≥99.9% |
Structure
Structure: Includes dust bin top cover, dust collection chamber, filter bag assembly (inside the cylinder), etc.
Operating principle
Place a rubber O-ring between each piece to seal. The device for hanging the filter bags of the dust collector is located in the cylinder of the dust collector, in which 36 groups of filter bags are suspended. The dust collector has three cylinders. The cylinder solenoid valve is actuated and the cylinder is ventilated, allowing the cylinder rod to extend and retract quickly, and the vibration deforms the filter bag to separate the dust from the filter bag. Under the influence of gravity, it falls into the dust collecting chamber of the dust collector and is regularly removed from the base to remove dust.
contact us
Related Popular Products
LJG-D Series Electromagnetic Armored Magnetic Separator for Steel Slag
Broadband magnet is widely used in areas with transported materials. Belt magnets are installed on top of the cross conveyors. The permanent magnet unit is a key piece of equipment which, thanks to our advanced designs, is usually equipped with a discharge belt. It has high strength as well as a long service life.
X-ray processing of minerals
Product Background X-Ray Spectrum Sorter (XRF) Mineral depletion rates have increased as mining has developed over the years, resulting in increased energy and material consumption in downstream crushing, grinding and screening processes, resulting in increased production costs. Thus, pre-sorting is an effective way to improve production efficiency and reduce production costs.
PDC
The manual electromagnetic iron separator is used at sites where it is necessary to remove small and large iron particles in thick layers of material, such as coal transportation stations, concrete processing sites, etc.
LCT
Permanent magnet drum separators are typically used to remove larger pieces of iron at a coarser stage. They are very useful in saving equipment costs by removing hard-to-reach materials early in the process cycle.
RCDE
Belt electromagnetic separators are installed along the material flow or transversely to remove ferrous materials over the side of the conveyor or across the conveyor.
XRT Intelligent sorting machine
Product Background Intelligent Sorter (XRT) Mineral depletion rates have increased as mining has developed over the years, resulting in increased energy and material consumption in downstream crushing, grinding and screening processes, resulting in increased production costs. Thus, pre-sorting is an effective way to improve production efficiency and reduce production costs.
RCYK-C
Permanent magnetic power plant separators, or cross belts as they are commonly called, are used in most power plants to remove any unwanted iron that gets into the system and onto the belts. An armored belt is available if the parts are sharp.
Eddy current sorter
Eddy Current Separator for Aluminum Recycling The Eddy Current Separator for Aluminum Recycling provides cost-effective sorting of different fractions of aluminum during the recycling process for use in the production of secondary aluminum.
Flotation magnetic separator
Automatic flotation magnetic separator is used to process magnetite ore. It is mainly used for the purer stage of iron ore separation.
mining and metallurgical industry of Russia new technologies and development prospects
The mining and metallurgical industry of Russia, as a country with global mineral reserves, occupies an important place in the world economy. This sector not only has a rich resource base, but also demonstrates strong technological innovation potential and broad development prospects.
LJWH Series Superconducting Magnetic Separator for Non-Metallic Minerals
Superconducting magnetic separation is an innovative physical magnetic separation method developed based on the application of superconducting technologies in the field of magnetic separation. It is suitable for removing impurities and purifying non-metallic minerals such as kaolin, bauxite, red mud, lepidolite and other minerals.
RCY-Q
Self-cleaning permanent magnetic separators, or permanent cross belts as they are commonly called, are used in almost every industry where there is a need to clean pig iron from a conveyor, but the intensity does not have to be as high and the job is easier. Some industries like this include plastic recycling, tire shredding, fertilizer, scrap metal and many more.
Intelligent Vertical Ring High Intensity Magnetic Separator
This product is specially designed for the enrichment of weakly magnetic minerals or the removal of ferrous impurities from non-metallic minerals.
LMW Series Electric Lifting Magnet
Lifting magnet is usually used to transport scrap continuously throughout the day. It is used in metalworking plants to lift and transport steel parts, forgings, castings, plates, beams, channels, angles, bars and bar grating. These are effective devices for saving time and labor costs. This relieves operators of the cumbersome work of installing and securing lift supports using traditional material handling tools.
LCT
Permanent magnet drum separators are typically used to remove larger pieces of iron at a coarser stage. They are very useful in saving equipment costs by removing hard-to-reach materials early in the process cycle.
RCDD
LONGi Electromagnetic Belt Conveyor Iron Separators, or Electro-Cross Belt Separators as they are commonly known, feature a highly advanced coil design that has been designed for use in a wide variety of operating environments.
