Products
![[Exhibition Highlights] LONGi Magnet at CIM Convention 2026 in Vancouver](https://ecdn.cnyandex.com/sylj/uploads/LONGi-Magnet-на-выставке-CIM-Convention-2026.jpg)
![[Exhibition Highlights] Longi Shines at the 19th Non-Metallic Minerals Conference](https://ecdn.cnyandex.com/sylj/uploads/Компания-Longi-блистает-на-19-й.jpg)
XRT Intelligent sorting machine
Product background Intelligent sorter (XRT)
The rate of mineral depletion has increased as mining has developed over the years, leading to increased energy and material consumption in downstream crushing, grinding and screening processes, resulting in increased production costs. Thus, pre-sorting is an effective way to improve production efficiency and reduce production costs.
Description
marker
| Model | LPNC12-80 | LPNC22-80 |
| Particle size | -80+15mm | -80+15mm |
| Production productivity | >50t/h | >100t/h |
| Power | <16.0kw/h | <25.0kw/h |
| Dimensions | 9200x1780x2500 | 9200x2780x2500 |
| Weight | 11t | 20t |
Structure
The intelligent sorter is composed of four parts: material conveying system, detection system, control system and drive sorting system. The material conveying system consists of vibrating feeder and conveyor belt; the detection system consists of an X-ray source and detectors; the electronic control part is the equipment control system; and the actuation system consists of pneumatic drive parts.
Operating principle
The material is fed evenly onto the conveyor belt through a vibrating feeder. The material passes through the detection zone on the conveyor belt at a uniform speed, the detection system transmits material information to the control system.
The control system computer converts and analyzes the signals and instructs the control system to separate the material.
Positive selection and opposite selection are available depending on the request of the actual process, which helps improve work efficiency.
Application
The intelligent sorter is mainly used to pre-select non-ferrous metal ores containing gold, silver, copper, zinc, tungsten, etc.
Application situation: The intelligent sorter is used in the stage after secondary crushing and fine crushing before grinding, to improve the grade before grinding and reduce the amount of feed material for grinding.
Scope of application: Greenfield project, reconstruction of an old plant, reuse of low-grade ore.
Application size: -80+15mm
Advantage: High-precision intelligent artificial intelligence algorithm, deep X-ray signal recognition network, identification across the entire spectrum of theories and accurate determination of ore components.
Equipment Features
The intelligent sorter has greater productivity than the traditional waste disposal process.
The intelligent sorter has lower consumption, only about 0.2~0.3kWh per ton.
The intelligent sorter is easy to operate and manage. No special workers are required to operate the equipment after setting it up. The monitoring system can provide centralized control and automatically facilitate management.
The intelligent sorter has a higher level of modularity. Modular production of all equipment components. Easy maintenance, spare parts inventory and management.
The intelligent sorter is highly
contact us
Related Popular Products
X-ray processing of minerals
Product Background X-Ray Spectrum Sorter (XRF) Mineral depletion rates have increased as mining has developed over the years, resulting in increased energy and material consumption in downstream crushing, grinding and screening processes, resulting in increased production costs. Thus, pre-sorting is an effective way to improve production efficiency and reduce production costs.
RCYK-C
Permanent magnetic power plant separators, or cross belts as they are commonly called, are used in most power plants to remove any unwanted iron that gets into the system and onto the belts. An armored belt is available if the parts are sharp.
RCDD
LONGi Electromagnetic Belt Conveyor Iron Separators, or Electro-Cross Belt Separators as they are commonly known, feature a highly advanced coil design that has been designed for use in a wide variety of operating environments.
LCT
Permanent magnet drum separators are typically used to remove larger pieces of iron at a coarser stage. They are very useful in saving equipment costs by removing hard-to-reach materials early in the process cycle.
RCY-Q
Self-cleaning permanent magnetic separators, or permanent cross belts as they are commonly called, are used in almost every industry where there is a need to clean pig iron from a conveyor, but the intensity does not have to be as high and the job is easier. Some industries like this include plastic recycling, tire shredding, fertilizer, scrap metal and many more.
mining and metallurgical industry of Russia new technologies and development prospects
The mining and metallurgical industry of Russia, as a country with global mineral reserves, occupies an important place in the world economy. This sector not only has a rich resource base, but also demonstrates strong technological innovation potential and broad development prospects.
RCDE
Belt electromagnetic separators are installed along the material flow or transversely to remove ferrous materials over the side of the conveyor or across the conveyor.
Eddy current sorter
Eddy Current Separator for Aluminum Recycling The Eddy Current Separator for Aluminum Recycling provides cost-effective sorting of different fractions of aluminum during the recycling process for use in the production of secondary aluminum.
Magnetic separator
The LONG it wet drum magnetic separator has a magnetic intensity of 650 to 7000 GS. It is suitable for concentrating ferromagnetic minerals such as magnetite and recovering heavy media. In 2011, LONG i launched the world's largest wet drum separator with a diameter of 1500 mm and a width of 5000 mm with a capacity of up to 400 t/h.
LMW Series Electric Lifting Magnet
Lifting magnet is usually used to transport scrap continuously throughout the day. It is used in metalworking plants to lift and transport steel parts, forgings, castings, plates, beams, channels, angles, bars and bar grating. These are effective devices for saving time and labor costs. This relieves operators of the cumbersome work of installing and securing lift supports using traditional material handling tools.
Permanent magnetic suspended iron separators
Permanent magnetic power plant separators, or cross belts as they are commonly called, are used in most power plants to remove any unwanted iron that gets into the system and onto the belts. An armored belt is available if the parts are sharp.
LCT
Permanent magnet drum separators are typically used to remove larger pieces of iron at a coarser stage. They are very useful in saving equipment costs by removing hard-to-reach materials early in the process cycle.
LJG-D Series Electromagnetic Armored Magnetic Separator for Steel Slag
Broadband magnet is widely used in areas with transported materials. Belt magnets are installed on top of the cross conveyors. The permanent magnet unit is a key piece of equipment which, thanks to our advanced designs, is usually equipped with a discharge belt. It has high strength as well as a long service life.
LJWH Series Superconducting Magnetic Separator for Non-Metallic Minerals
Superconducting magnetic separation is an innovative physical magnetic separation method developed based on the application of superconducting technologies in the field of magnetic separation. It is suitable for removing impurities and purifying non-metallic minerals such as kaolin, bauxite, red mud, lepidolite and other minerals.
Dust collector for monocrystalline silicon
Structure: Includes dust bin top cover, dust collection chamber, filter bag assembly (inside the cylinder), etc.
High Intensity Wet Concentration Magnetic Separator for Metal Removal
This product is specially designed for the enrichment of weakly magnetic minerals or the removal of ferrous impurities from non-metallic minerals.
